GARDA Corner

MSRP $16.00$80.00

GARDA pre-formed corners are to be used in conjunction with GARDA Membrane to seal inside and outside corners creating a completely waterproof system

GARDA Corners consist of a polyethylene inner membrane and covered with a polypropylene fleece which anchors the membrane to the thin set mortar. GARDA Corners are preformed, come in inside and outside types and are thinner than the membrane to minimize build up when overlapped. Made to be used in conjunction with GARDA Membrane.

 

ITEM NUMBER QUANTITY THICKNESS
GC2 2 Pack Inside corners 0.4mm
GCZ2 2 Pack Outside corners 0.4mm
GC10 10 Pack Inside corners 0.4mm
GCZ10 10 Pack Outside corners 0.4mm

INSTALLATION:

Corners can be installed in any order but it is recommended to install corners after walls are waterproofed and before floor.

  1. Apply thinset mortar into all sides of the corner with a trowel and embed GARDA Corner firmly into thinset making sure no air bubbles remain
  2. Wipe off excess thin set mortar protruding from seam

The thin set mortar is applied and must be appropriate for the substrate- generally an un-modified thin set mortar is used

 

*Instructions for installing GARDA Strips included on this page are for representative purposes only.

Downloads

GARDA Membrane Installation Instructions
Download GARDA Membrane Installation Instructions PDF

EV SSL Certificate